The Plumber’s Trick So You Don’t Lose So Much Water in the Toilet

The trick is to add a weight to the toilet tank valve, which ensures a firmer and more effective shutoff. Here’s how to do it step by step:

Identify the valve: Open the toilet tank lid and locate the flush valve. It’s the piece that lifts up when you flush the chain.
Prepare the weight: Find a small, heavy object, such as a metal washer, a flat stone, or even a small bag of sand.
Attach the weight: Tie the weight carefully to the valve with a sturdy string or thin wire. Make sure the weight doesn’t interfere with the opening mechanism.
Test the operation: Pull the chain to make sure the valve opens and closes properly with the weight in place.
Adjust if necessary: If you notice any problems with the clasp, adjust the position or size of the weight until the mechanism works perfectly.

Check the parts regularly: Make sure the weight doesn’t rust or damage the valve over time.
Cleaning the tank: Before placing the weight, take the opportunity to clean the tank and remove debris that may interfere with the mechanism.
Avoid excessive weights: Too much weight could damage the system. Choose an object light enough not to force the mechanism, but with the right weight to seal the valve well.